MSP-100 – 100 Ton Die Spotting Tryout Press

  • Request Quote
  • Schedule a Demo
  • Get Financing
  • Sell Yours Here
  • Other Sizes
  • Email to a Friend
  • Print
MSP-75 – 75 Ton Die Spotting Tryout Press
  •  Specifications
  •  Features
  •  Options
  •  Product Overview
MTP-100US StandardMetric
Clamping Force110 tons100 tonnes
Opening Force28.6 tons26 tonnes
Overturn Force4.4 tons26 tonnes
Ejection Force3.3 tons3 tonnes
Working Speed2.7 inch/sec0 -70 mm/sec
Clamping Speed1.2 inch/sec0 -30 mm/sec
Die Dimensions55 x 43 inch1400 x 1100 mm
Opening Stroke of Upper and Lower Platen57 inch1470 mm
Minimum Distance Between Two Platens6.7 inch170 mm
Shift Out Stroke of Die114 inch2900 mm
Ejection Stroke8.6 inch220 mm
Overturn Angle180°180°
Max Weight of Die8.8 tons8 tonnes
External Dimensions
(L x W x H)
212 x 87 x 187 inch5400 x 2200 x 4750 mm
Machine Weight19.8 tons18 tonnes
Motor Capacity20 HP15 kW
  • Color HMI with die/job memory
  • Interlocked, hinged guards on 3 sides
  • Linear position sensor
  • Safety ratchet bar
  • Solid, robust construction


  • PLC and HMI color touch screen with graphics and die setup memory.



  • Allen Bradley PLC and HMI Control System
  • Siemens PLC and HMI Control Systems
  • Omron PLC and HMI Control Systmes


The MSP series die spotting press is suitable for final assembly, grinding and repair work of molds/dies for various processes including plastic injection mold, punching die, transfer mold, metal mold, forging mold, die-casting dies, glass mold, rubber and plastic mold, metallurgy die and is specially and ideally designed for the mold/die manufacturing industry. In addition, it the MSP series is well suited for large area sheet cold press molding in the auto industry, motorcycle industry and hardware industry.

This spotting press is composed of an upper worktable that can move up and down, and also flip, and a lower worktable that moves horizontally. The lower worktable is pushed to the auxiliary worktable, while the upper worktable can move up and down and also flip 180°. Finally, the upper and lower dies are faced up on the worktable for easy observation and grinding conducted by the operator.

The MSP series die spotting press comes in two configurations.  The standard configuration is MSP with a front bolster.  The second configuration is MSP-SB with a side bolster (SB).  Each configuration comes in a variety of sizes. This manual applies to both configurations.

The MSP series die spotting press has been developed using 3D modeling of the body assembly, motion simulation and optimization of key parts. In addition, the latest simulation technology has been used to optimize kinematics and dynamic characteristics to ensure smooth open/close operation and balanced mold/die clamping force. The permanent seat and shifting seat use a box-type structure, and undergo finite element stress analysis and strain analysis to ensure high parallelism between the two platens. The whole hydraulic system features good dynamic performance, smooth switching and no-leakage to comply with environmental protection concepts. The control portion is designed with a state of art PLC and HMI which features a large color LCD.  This spotting press designed with oil temperature monitoring and a comprehensive alarm system with simple fault detection capabilities for easy troubleshooting and maintenance. This spotting press is provided with three safety protection units, including mechanical, hydraulic and electrical units.

Please carefully read and understand this instruction manual before using this machine. For more information about technology or operation, please feel free to contact us.

  • Type One Way
  • Opening Force 28.6 tons
  • Ejector Stroke 8.6 inch
  • Ejector Force 3.3 tons
  • Motor Drive Servo motor

  • touch screen
  • light curtain
  • linear sensor
  • core circuits
Select Your Category
Subscribe Our News letter

Keep up on our always evolving products features and technology. Enter your e-mail and subscribe to our newsletter.

Product tags